This is the Hammond B4 concept by J.Q (Korg M3)

Samples
- There are 671 different samples. Each key (C1 ... C6 = 5 octaves); each drawbars (1 ... 9) plus 2 percussion sounds.
Multisamples
- There are 11 different multisamples: each drawbar (1 ... 9) plus 2 percussion sounds. (2nd and 3rd)

Programs
- Program bank F holds the basic "building blocks" for the Hammond sound. Each drawbar (1 ... 9) and 2 percussion sounds (2nd and 3rd) are here. You don't want to play with these, so just read on.

Combis
- This is where the magic happens. Combi-bank UG contains The Hammond B3 (or B4) sounds.
- Combi D: 000: B4 The Core is the very basic hammond sound. All other combis are based on this combi; that is, they're originally copied from this combi, and tweaked furthermore.
- See Controls section (below) for more detailed controls.
- Names are loosely based on the presets in NI-B3-II, but don't take these too seriously.
- See Combi-list below

Controls
- Use Sliders 1 ... 8 for drawbars (1 ... 8)
- NOTE: Drawbar 9 is located in Combi's program #9. Since there's only 8 sliders in M3, you don't have a realtime control over it. Use the touch screen to edit the volume of drawbar 9.

- Value Slider: adjusts amount of overdrive.

- SW1: Vibrato/Chorus: On/Off. Light in the button displays you whether the Vibrato/Chorus is on or off. Press once to turn on, press again to turn off. In some combis the effect is Vibrato, on the others it's Chorus, or a mix of them both. See effect IFX1.

- SW2: Leslie: On/Off. Light in the button displays you whether the Vibrato/Chorus is on or off. Press once to turn on, press again to turn off. (See notes on Joystick Y- below!)

- Joystick Y- (pull down the joystick): Leslie Brake: pull the joystick down to completely stop the rotating speaker.
NOTE1: Pull joystick down to stop Leslie, pull joystick again to release Leslie again.
NOTE2: When Leslie is stopped (by pulling down the joystick once), there will be no effect on pressing SW2: the Leslie will stay stopped.

- Ribbon: Adjust Leslie's rotating speed manually. Left = Slow. Right = Fast.
NOTE: When you let go of the ribbon, the Leslie will return to Slow. This will not reset the light in the SW2. So you may end up with SW2 light on, but the Leslie is on Slow. Press SW2 twice (-> Off -> On) to start Leslie again.

- Percussion 2nd and percussion 3rd are located in Combi's programs 10 and 11. So whenever you need them, just un-mute them.


Effects
- Each Combi has the following FX-chain:
IFX:
1: Organ Vib/Chorus
2: St. Tube PreAmp
3: Stereo Compressor
4: OD/Hi.Gain Wah (varies on some Combis)
5: Rotary Speaker

MFX:
1: St. Graphic 7EQ
2: Reverb SmoothHall (varies on some Combis)
3: St. MasteringLimtr


Combi-list (D Bank)
000: B4 The Core
001: B4 Hi There
002: B4 Les Onions
003: B4 Super Rotor
004: B4 Progstock
005: B4 Blues
006: B4 House (Evrbdy in Da!)
007: B4 Oye Como What!?
008: B4 No Woman No B
009: B4 Born to B Heavy
010: B4 Percussive Organ
011: B4 Reggae
012: B4 A Whiter Shade...
013: B4 Huge Balls
014: B4 Jazz
015: B4 Barbara Drrlr... Who?
016: B4 Sly'ed. Totally.
017: B4 Purpled, Not Hazed
018: B4 How Deep?
019: B4 Der Wunderlich
020: B4 Soul/R+B/Arm/Leg
021: B4 Sale! All Out! =:-O

Installation

1. Copy SAMPLE.IMG and META.IMG files to the root of you SD Card
2. Copy B4KROME.PCG file to any place on SD Card
3. Turn off your KROME, insert SD Card and turn KROME on again.
4. Wait until the OPTION PCM bank is updated
5. Load B4KROME.PCG file from SD Card
6. Select COMBI D000 
7. Enjoy =)

Sample and PCG Conversions done by Cyph / http://www.kromeheaven.com

